Epoxy
SteelStik, 2 OZ, Reinforced Epoxy Putty Adhesive/Sealant Stick, Plugs Holes & Makes Permanent Repairs On Wet & Dry Surfaces, Simply Knead Thoroughly With Your Fingers & Apply, Will Cure Completely In 2 To 30 Minutes Even If Submerged In Water Or Gasoline, It Can Be Drilled, Sanded, Filed, Tapped, Machined & Painted.
JB Weld, 25 ml, Original Epoxy Syringe, Fast Setting 2 Part Epoxy Cold Weld System That Provides Strong, Lasting Repairs To Metal & Multiple Other Surface Types, After Mixing It Forms A Permanent Bond & Can Be Shaped, Tapped, Filled, Snaded & Drilled After Curing, 1:1 Mixing Ratio Sets In 6 Minutes & Is Fully Cured In 4-6 Hours, Great For Household Repairs, Automotive, Plumbing, Marine, Crafts & More.
10 OZ, Original Adhesive Compound Cold Weld, Works On Just About Any Surface Including Iron, Steel, Copper, Aluminum, Brass, Bronze, Pewter, Porcelain, Ceramic, Marble, Glass, Concrete, Fiberglass, Wood & Most Plastics, Just Squeeze Equal Parts From The 2 Separate OZ Tubes Onto A Mixing Surface & Mix Thoroughly With A Putty Knife Or Similar Tool, Cures In 24 Hours, When Cured It Will Withstand Temperatures Of 600 Degrees Fahrenheit, Waterproof, Petroleum, Chemical & Acid Resistant, Can Be Drilled, Tapped, Machined, Filed, Sanded & Painted, 3960 PSI Tensile Strength, Perfect Solution For Any Heavy Duty Adhesive Job, Tube.
Marine Weld, 25 ml, Marine Weld Epoxy Adhesive Syringe, Specially Formulated 2 Part Cold Weld System, Provides For Strong, Lasting Repairs For Bonding Different Or Similar Surfaces, Such As Aluminum, Metal, Composites, Fiberglass & Others, Marine Weld Sets In 4-6 Hours At Room Temperature & Is Fully Cured To A Dark Gray Color In 15-24 Hours, Once Cured It Can Be Shaped, Tapped, Filed, Sanded & Drilled & Will Retain Its Strength Above Or Below The Waters Surface.
25 ml, Black, Plastic Bonder Syringe, 2 Part Urethane Adhesive System That Provides Strong & Lasting Repairs & Works On Thermoset, Carbone Fiber Composites, Thermoplastics, Coated Metals, Concrete & More, Sets In 15 Minutes & Can Be Sanded After 30 Minutes.
Gorilla Glue, 2 OZ, Epoxy Stick, Versatile, All Purpose, 1,000+ PSI Strength, Waterproof, Sets In 10 Minutes, Dries Gray, East To Use, Great For Auto Applications, Withstands Temperatures Up To 350 Degrees Fahrenheit, Works On Plumbing Applications, Bonds Metal, Plastic, Concrete, PVC, Fiberglass, Ceramic & More.
2 OZ J-B KwickWeld Tube, Fast Set Cure Version, Sets In 4 Minutes & Fully Cure In 4-6 Hours, Waterproof, Petroleum, Chemical & Acid Resistant Once Fully Cured, Non-Toxic, Temperature Resistant Up To 300 Degrees, Can Be Used On Almost Any Surface, Bronze, Porcelain, Ceramic, Marble, Glass, Wood, Concrete, Fiberglass, Steel, Iron, Copper, Aluminum, ABS & PVC Plastics, When Fully Cured Can Be Drilled, Tapped, Machined, Filed, Sanded & Painted.
Cold Weld, 2 OZ, Original Adhesive Compound , It Works On Just About Any Surface Including Iron, Steel, Copper, Aluminum, Brass, Bronze, Pewter, Porcelain, Ceramic, Marble, Glass, Concrete, Fiberglass, Wood & Most Plastics, Just Squeeze Equal Parts From The 2 Separate 1 OZ Tubes Onto A Mixing Surface & Mix Thoroughly With A Putty Knife Or Similar Tool, Cures In 24 Hours & When Cured It Will Withstand Temperatures Of 600 Degrees, Waterproof, Petroleum, Chemical & Acid Resistant, Can Be Drilled, Tapped, Machined, Filed, Sanded & Painted, With A Tensile Strength Of 3960 PSI, Perfect Solution For Any Heavy Duty Adhesive Job, Tube.
Water Weld Auto, 2 OZ, Epoxy Putty, Plugs Holes & Make Permanent Repairs In Moist Surface Or Under Water Applications, Waterweld Will Even Repair Leaking Fuel Tanks, Pull Off The Amount Needed For Job & Knead With Fingers Until Thoroughly Mixed, Then Push Product Into Hole, Cures In 20 To 30 Minutes & Can Be Drilled, Sanded, Filed, Tapped, Machined & Painted, Non-Toxic & Approved For Use With Potable Water, Use On Auto, Ceramic, Epoxy Putty Sticks, Fiberglass, Metal, Plastic/Composite/PVC & More.
